| Power |
| Ratings (kVA/Watts) |
10 kVA/9 kW and 15 kVA/13.5 kW at 0.9 power factor |
| Topology |
Double conversion |
| Electrical Input |
| Nominal input voltage |
208V/120V or 220V/127V three-phase 400V models also available |
| Input voltage range |
-15%, +10% from nominal at 100% load without depleting battery |
| Operating frequency |
50/60 Hz (45 to 65 Hz) |
| Input power factor |
>0.99 typical, >0.96 frequency converter |
| Input current distortion |
5% THD |
| Electrical Output |
| Nominal output voltage |
208/120, 220/127 Vac |
| Output voltage regulation |
±1% static; ±5% dynamic at 100% resistive load change, <1 ms response time |
| Efficiency |
91%, typical |
| Heat dissipation (BTU/hr) |
10 kVA models:
3,798 @ 208V and 220V input
6,294 @ 480V and 600V (with input isolation transformer)
15 kVA models:
5,122 @ 208V and 220V input
8,134 @ 480V and 600V (with input isolation transformer) |
| Battery |
| Battery type |
9 Ah, sealed, lead-acid, maintenance-free |
| Battery runtime |
See battery backup time chart |
| Battery management |
ABM technology |
| Battery replacement |
Field-replaceable |
| Charger |
Default is 3.4A per battery string. Charger current is configurable from 0.5A to 25A per string with an overall maximum of 34A (limited by input current) |
| Start-on-battery |
Allows start of UPS without utility input |
| General |
| Diagnostics |
Full system self-test at startup |
| UPS bypass |
Automatic on overload or UPS failure |
| Parallel for redundancy |
Yes, using Powerware Hot Sync technology and capacity |
| Dimensions and weights |
See model selection table |
| Overload (normal operation) |
150% for 5 sec / 125% for 1 min (online),
110% for 10 min |
| Communications |
| LCD display |
Graphical LCD with blue backlight |
| LEDs |
(4) LEDs for notice and alarm |
| Audible alarms |
Yes |
| Communication ports |
(1) RS-232, (1) relay contact, (1) REPO,
(2) environmental input |
| Communication slots |
(2) X-Slot communication bays |
| Power management software |
Bundled Software Suite CD |
| Environmental |
| Operating temperature |
50–104ºF (10–40ºC), 45ºC with 7.5% derating; Optimal battery performance: 77ºF (25ºC) |
| Storage temperature |
32–77ºF (0–25ºC); Recommended battery storage: 59–77ºF (15–25ºC) |
| Relative humidity |
0–95%, non-condensing |
| Audible noise |
<56 dBA at 1 meter (noiseless room) typical |
| Altitude |
9,843 ft. (3000m) without derating |
| Certifications |
| Safety certifications |
UL1778 5th Edition, CSA C22.2 No. 107.3-14 |
| EMC compliance |
47 CFR Part 15/ICES-003 Class A |
| Quality |
ISO 9001:2015, ISO 14001:2004 |
| Surge |
ANSI C62.41 Category B3, IEC 61000-4-5 |
| Markings |
cULus |
